Axial Racing Wraith Steering-Precision C Hub Carrier - AW-23012-BK by Jazrider  [AW-23012-BK]

C-Hub Carrier to Improve Steering Precision

This is an RC-scale replacement C hub carrier intended for Axial Racing Wraith chassis, produced by JAZRIDER as model AW-23012-BK. The part is machined from aluminium and serves as a direct swap for the plastic or stock alloy pieces used at the wheel hubs.

Because the C hub determines hub position relative to the steering knuckle and suspension, it influences toe, scrub radius and steering geometry. The stiffer aluminium option reduces compliance at the hub, delivering a more repeatable steering input under load while remaining compatible with standard Wraith hub assemblies.

Installation steps are standard: remove wheel and hub, extract the existing carrier, transfer bearings and pins as needed, and secure the aluminium carrier using original fasteners. Check bearing fit and confirm full-range steering movement after assembly to detect any interference.

Tuning perspective: swapping to this aluminium carrier is a straightforward upgrade to sharpen steering response or replace fatigued parts after off-road use, particularly useful for drivers dialing in precise steering behavior.