Axial Racing Yeti XL 150mm L-shape Damper Front and Rear - YTL150F/R/L by GPM  [YTL150F/R/L]

L-shape 150mm Shock for Yeti XL

This aluminium L-shape damper is a scale RC spare tailored for the Axial Racing Yeti XL chassis. It is supplied as a single pair (1pr) with a 150mm length and fitted with a 6mm steel shaft. The part is intended to replace or upgrade shocks where an L-shape configuration is required by the vehicle layout.

Fitment and role: listed for Axial Racing Yeti XL compatibility, the damper is a suspension component that affects ride height, damping response and wheel control. The adjustability provides basic tuning options while preserving the original suspension geometry.

Installation notes: delivered as a finished damper assembly; ensure Axial Yeti XL shock mounts align with the L-shape ends before installing. Most installations reuse standard hardware from the original setup, so keep ball ends and mounting pins when possible. Conduct a test fit to verify travel and clearance at front and rear positions.

Maintenance and tuning tips: inspect the shaft for straightness and check seal condition during service intervals, use compatible shock oil and match spring rates to your driving conditions, and make small adjustments to observe handling changes.

A solid aluminium replacement for Axial Yeti XL tuners who want a 150mm L-shape front/rear unit with a durable 6mm shaft to fine tune suspension feel without changing geometry.