Axial Racing Yeti XL Aftermarket Rear Axle Steel #45 8mm Hex - YTL169RS8 by GPM  [YTL169RS8]

Axial Racing Yeti XL Steel #45 Rear AXLE With 8mm Wheel Hex(AX31085) - 1set - GPM YTL169RS8
Price:
AUD$38.84
Brand:
GPM
Model:
YTL169RS8
GTIN:
4894538246445
Condition:
Brand New
Write a review

Steel rear axle for Yeti XL

Supplied as a single set, this rear axle is intended as an aftermarket replacement for Axial Racing Yeti XL vehicles. Made from steel #45 and matched to an 8mm wheel hex, it is aimed at users wanting straightforward swap-in strength and repeatable wheel mounting.

Before installation: confirm your existing axle bore and hex size, keep any original shims or spacers in place, and check propulsion shaft engagement after fitting. Use the axle to replace worn assemblies or to add a stiffer steel option for consistent wheel alignment on rough terrain.

Specifications

  • Item Axial Racing Yeti XL Steel #45 Rear AXLE With 8mm Wheel Hex (1 set)
  • Material Steel #45
  • Model Number YTL169RS8
  • Compatibility AX31085, Axial Racing Yeti XL

Ideal for replacing worn rear axle parts or upgrading to a stronger steel component to improve wheel mounting consistency in off-road conditions.

Does this axle replace the stock Yeti XL part directly?

The part is listed for Axial Racing Yeti XL and references AX31085; it will typically swap in directly if your bore and hex match, but always check dimensions first.

Should I reuse factory spacers and shims?

Yes, retain factory spacers and shims unless you have a specific setup change; correct spacing keeps driveshaft engagement and alignment accurate.

Are there recommended torque settings for the wheel hex?

Follow your wheel and hub manufacturer's guidance; check retention hardware after test runs to confirm nothing has loosened under load.

Will switching to steel affect acceleration feel?

Added mass at the axle or wheel can slightly influence rotational inertia, but many hobbyists accept that tradeoff for improved durability and repeatable wheel seating.

Copyright © 2008-2026 rcjaz.com.au All rights reserved