Axial RR10 Bomber 2.2'' Trail Aluminium 6-Pole Wheel AW2206F/R by GPM  [AW2206F/R]

Axial Racing RR10 Bomber Aluminium 6 Poles Wheels For 2.2\'\' Tire - 1pr - GPM AW2206F/R
Price:
AUD$62.83
Brand:
GPM
Model:
AW2206F/R
GTIN:
4894538124118
Condition:
Brand New
Write a review

Durable 6-pole aluminium wheel for 2.2'' tyres

This 2.2'' tyre scale wheel is intended as an upgrade to plastic wheels on Axial RR10 Bomber style crawlers and trail rigs. Machined aluminium construction paired with a six-pole spoke pattern offers a robust surface for beadlock-style tyres and reduces deformation during low-speed technical driving.

Note that this is an RC accessory only and not for real vehicle use. Compatibility is governed by wheel bore, hex interface and tyre size; the item is specified for 2.2'' tyres. Before ordering, check your wheel hex size and offset to ensure the wheel clears suspension parts and the body.

Installation tips: remove current wheel hardware, mount the tyre to the wheel following the tyre maker's guidance, and torque the mounting hardware to the chassis recommended values. Confirm proper seating on the hex and use matching hex adapters or wheel nuts for the RR10 Bomber hub. Reinspected fasteners after the first outings.

Specifications

  • Item: Wheel
  • Material: Aluminium
  • Model Number: AW2206F/R
  • Compatibility: For 2.2" tires
  • Design: 6-pole wheel

Choose these aluminium 6-pole wheels to strengthen 2.2'' tyre RC setups, and match hub hardware carefully to maintain dependable trail and crawler performance.

Will these fit without adapters on an RR10 Bomber?

If your RR10 hub uses the same hex size as the wheel bore, adapters are not needed. If sizes differ, use the correct hex adapter to achieve a secure fit.

Should I change my wheel nuts when fitting these?

Use wheel nuts that match the wheel's mounting pattern and your hub style. Replace worn nuts and choose hardened or lock-style nuts where appropriate for trail use.

Are there fitment checks to do after first runs?

Yes. After initial runs, recheck torque on all mounting bolts, inspect hex seating and look for any unusual wear on the tyre bead or wheel face.

Can I use standard foam inserts with these wheels?

Standard 2.2'' foam inserts will usually work; confirm that the insert profile matches your tyre and that the tyre beads clamp correctly to the wheel during assembly.

Copyright © 2008-2026 rcjaz.com.au All rights reserved