The 6 piece adjustable aluminium link set is a practical upgrade for Axial Racing SCX10 chassis with a 315mm wheelbase. These metal links replace the factory plastic rods to reduce flex and offer accurate length adjustment for setup and handling improvements.
Fitting is straightforward for anyone who has removed links before: take off the existing links from the steering knuckles and axle mounts, keep left and right orientation, then install the turnbuckles using original ball ends or supplied rod ends. Final length is set with a small spanner or hex driver and the turnbuckles should be secured to prevent movement while running.
For tuning, the adjustable links let you make fine changes to toe, caster and ride height; small tweaks to link length affect steering feedback and roll center, so move in small increments and test on the surface you normally run. The aluminium build reduces compliance compared with plastic, helping deliver more consistent steering inputs and setup repeatability.
Fit these links when you want metal adjustability on a 315mm SCX10 and aim to refine steering and suspension geometry with measured testing.
Copyright © 2008-2026 rcjaz.com.au All rights reserved
