Axial SCX10 Compatible 85T Steel #45 48 Pitch Spur Gear SSCX085T by GPM  [SSCX085T]

Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 85T - 1pc set (For SCX10, Wraith) - GPM SSCX085T
Price:
AUD$16.73
Brand:
GPM
Model:
SSCX085T
GTIN:
4894538165913
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 85T - 1pc set (For SCX10, Wraith) - GPM SSCX085T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 85T - 1pc set (For SCX10, Wraith) - GPM SSCX085T"
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 85T - 1pc set (For SCX10, Wraith) - GPM SSCX085T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 85T - 1pc set (For SCX10, Wraith) - GPM SSCX085T"
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 85T - 1pc set (For SCX10, Wraith) - GPM SSCX085T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 85T - 1pc set (For SCX10, Wraith) - GPM SSCX085T"
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 85T - 1pc set (For SCX10, Wraith) - GPM SSCX085T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 85T - 1pc set (For SCX10, Wraith) - GPM SSCX085T"
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 85T - 1pc set (For SCX10, Wraith) - GPM SSCX085T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 85T - 1pc set (For SCX10, Wraith) - GPM SSCX085T"

85T spur for crawler drivetrains

This RC-scale spur is built for Axial Racing SCX10-based rigs and Wraith models using a 48 pitch system. The SSCX085T 85-tooth Steel #45 spur meshes with a matching pinion to translate motor torque into the drivetrain with standard scale pitch compatibility.

Fit the spur to your transmission or gearbox following your chassis routine, ensuring proper mesh with the motor pinion and checking for correct backlash and axial alignment. Use thin shims where necessary and avoid compressing bearings during assembly.

Spur and pinion selections influence acceleration and top-end response, so experiment with different tooth counts to suit trail speed or torque needs. Regular checks for wear and light lubrication at contact points will keep the gear performing reliably.

Compatible Models

  • SCX10
  • Wraith

Can SSCX085T handle brushless torque?

It will work with brushless setups if the drivetrain is set up correctly for 48 pitch and bearings/support are in good condition. Confirm mesh and gearbox integrity before high-torque runs.

What tools help with accurate mesh setup?

Use feeler gauges or thin shims, a small screwdriver for trial rotation, and a stable motor mount to achieve consistent mesh without binding.

When should the spur be replaced?

Replace the spur if teeth show notable wear, chipping, or if gear engagement becomes noisy despite correct mesh and lubrication.

Copyright © 2008-2026 rcjaz.com.au All rights reserved