Axial SCX10 Compatible Hex Adapter 14mmx9mm - AX010/14X9MM by GPM  [AX010/14X9MM]

14mmx9mm alloy hex for wheel mounting

This 4pc adapter set converts wheel hub interfaces to a 14mmx9mm hex layout using model AX010/14X9MM, designed for Axial Racing EXO, SCX10 and Wraith chassis. The alloy pieces are supplied as a matched set for one axle.

These adapters function as the link between hub and wheel to preserve wheel alignment and positioning when fitting aftermarket wheels or changing offsets. They are intended for scale crawler and trail rig wheel mounting duties.

Fitting notes: ensure each adapter is fully seated against the hub and the hex engagement is correct before tightening. Use the proper hex driver for wheel screws, inspect for play after the first run, and re-torque hardware after initial testing. Follow your usual practice if using threadlocker on wheel fasteners.

Practical tuning: the low-profile adapters allow small adjustments to track width and stance, useful for achieving the correct clearance with beadlock or custom wheels on EXO, SCX10 and Wraith platforms.