Axial SCX10 Crawler Spur 48 Pitch 89T with Adapter - SSCX1589T by GPM  [SSCX1589T]

Axial Racing SCX10 Steel #45 Spur Gear 48 Pitch 89T + Aluminium Spur Gear Adapter - 1set (For SCX10, Wraith) - GPM SSCX1589T
Price:
AUD$29.39
Brand:
GPM
Model:
SSCX1589T
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Axial Racing SCX10 Steel #45 Spur Gear 48 Pitch 89T + Aluminium Spur Gear Adapter - 1set (For SCX10, Wraith) - GPM SSCX1589T" title="Axial Racing SCX10 Steel #45 Spur Gear 48 Pitch 89T + Aluminium Spur Gear Adapter - 1set (For SCX10, Wraith) - GPM SSCX1589T"
alt="Axial Racing SCX10 Steel #45 Spur Gear 48 Pitch 89T + Aluminium Spur Gear Adapter - 1set (For SCX10, Wraith) - GPM SSCX1589T" title="Axial Racing SCX10 Steel #45 Spur Gear 48 Pitch 89T + Aluminium Spur Gear Adapter - 1set (For SCX10, Wraith) - GPM SSCX1589T"
alt="Axial Racing SCX10 Steel #45 Spur Gear 48 Pitch 89T + Aluminium Spur Gear Adapter - 1set (For SCX10, Wraith) - GPM SSCX1589T" title="Axial Racing SCX10 Steel #45 Spur Gear 48 Pitch 89T + Aluminium Spur Gear Adapter - 1set (For SCX10, Wraith) - GPM SSCX1589T"
alt="Axial Racing SCX10 Steel #45 Spur Gear 48 Pitch 89T + Aluminium Spur Gear Adapter - 1set (For SCX10, Wraith) - GPM SSCX1589T" title="Axial Racing SCX10 Steel #45 Spur Gear 48 Pitch 89T + Aluminium Spur Gear Adapter - 1set (For SCX10, Wraith) - GPM SSCX1589T"
alt="Axial Racing SCX10 Steel #45 Spur Gear 48 Pitch 89T + Aluminium Spur Gear Adapter - 1set (For SCX10, Wraith) - GPM SSCX1589T" title="Axial Racing SCX10 Steel #45 Spur Gear 48 Pitch 89T + Aluminium Spur Gear Adapter - 1set (For SCX10, Wraith) - GPM SSCX1589T"

Scale crawler spur and adapter kit

This replacement kit contains a steel #45 89T spur at 48 pitch together with an aluminium adapter, intended for Axial SCX10 and Wraith scale crawlers. The two-piece set mounts to the vehicle's existing spur housing using the adapter for a clean fit.

Use the kit to increase durability for trail work or when fitting a larger spur for better low-end torque under load. It is designed for model-scale drivetrain use and requires a matching 48 pitch pinion to get the correct mesh and reliable operation.

Fitting pointers: confirm your pinion is 48 pitch and allow correct clearance before final tightening, establish proper gear mesh to prevent early tooth wear, and inspect for any wobble after installation. The adapter centres the spur on the gearbox and helps limit axial movement.

Compatible Models

  • SCX10
  • Wraith

A straightforward upgrade for owners wanting a robust 48 pitch 89T steel spur with an aluminium adapter to improve mounting and durability on SCX10 and Wraith drivetrains.

Is the 89T size a direct swap?

If your gearbox and housing accept an adapter-mounted spur and you use a 48 pitch pinion, the 89T can be fitted. Verify clearance to surrounding parts first.

Will this change my gearing significantly?

A larger 89T spur will lower your final drive ratio and increase torque at low speed. Consider motor and ESC settings if you change overall gear ratio.

Any maintenance required?

Regularly check mesh, clean debris from teeth, and inspect the adapter bolts or set screws after a few runs to ensure nothing has loosened.

Can I reuse my original mounting screws?

Often the original hardware is fine, but confirm screw length and thread engagement suit the adapter to avoid stripping or poor clamping.

What materials are used in the kit?

The kit pairs a steel #45 89T spur with an aluminium adapter to balance wear resistance at the gear face and accurate mounting at the gearbox interface.

Copyright © 2008-2026 rcjaz.com.au All rights reserved