Axial SCX-10 Direct-Fit Aluminum Tie Rod (Silver) - ASCX10-22403-02-S by Jazrider  [ASCX10-22403-02-S]

Axial Racing SCX-10 Aluminum Steering Linkage (Silver)
Price:
AUD$9.98
Brand:
JAZRIDER
Model:
ASCX10-22403-02-S
Condition:
Brand New
Available in shop
Write a review

SCX-10 Steering Link Overview

This RC steering linkage is designed specifically for the Axial SCX-10 platform, finished in silver aluminum. The part is identified as ASCX10-22403-02-S and serves as a direct replacement to correct steering alignment where the original link has failed.

Installation is straightforward: remove the old tie rod, inspect the ball cup and ends for wear, fit the aluminum link and tighten to the recommended engagement. Standard hex drivers and small spanners are sufficient for most fits. Verify full steering travel and that nothing contacts the servo horn after installation.

For tuning, an aluminum link reduces flex in the steering system and helps retain toe settings under load. Remember that servo tuning, link length, and suspension geometry all influence the final steering response.

What should I check after fitting the new tie rod?

After fitting, check steering endplay, confirm equal tie-rod lengths both sides, and ensure the servo arm clears the new linkage at full lock.

Can this affect steering slop?

Yes, a stiffer metal link can reduce perceived slop compared with worn plastic parts, but slop can also come from worn rod ends or servo gears.

Is any threadlocker recommended?

Use a mild threadlocker on metal-to-metal threads if you want to prevent loosening, but avoid over-tightening which can bind the linkage.

Copyright © 2008-2026 rcjaz.com.au All rights reserved