Axial SCX-10 Honcho 115mm Front Lower Chassis Link, Aluminum Performance Upgrade - ASCX10-22473-GU by Jazrider  [ASCX10-22473-GU]

Axial Racing SCX-10 Honcho Aluminum Front lower Chassis Linkage 115mm (Gunmetal)
Price:
AUD$12.57
Brand:
JAZRIDER
Model:
ASCX10-22473-GU
Condition:
Brand New
Write a review

Tuning impact of lower link length

This 115mm aluminium front lower chassis linkage is made for Axial SCX-10 Honcho models and is finished in gunmetal. It replaces the stock lower link to provide a firmer mounting location that can sharpen steering response.

By fixing lower-arm length and pivot positions, the part directly influences roll centre and steering behaviour on scale crawlers. Fit it as a like-for-like SCX-10 Honcho replacement and keep factory mounting hardware when it is compatible.

Assembly tips: verify ball end seating and align mounting holes before final tightening, lubricate moving joints with an RC-rated grease, and run a binding check. Reduced flex compared with plastic links may require modest suspension retuning to achieve the desired handling balance.

Will switching to this 115mm link alter the roll centre?

Yes. The fixed link length changes pivot geometry and can raise or lower the roll centre depending on the rest of your suspension setup.

How should I adjust shocks after fitting?

Begin with small changes: review droop and spring preload, then tweak shock mounting positions if steering feels too sharp or too soft.

Is a road test necessary after installation?

Yes. Perform slow-range motion checks and a brief drive to confirm there is no binding and that steering response matches your tuning goals.

Copyright © 2008-2026 rcjaz.com.au All rights reserved