Axial SCX10 II 1.9" Brass-Weighted 6-Pole Aluminum Wheels AW1906H by GPM  [AW1906H]

1.9" aluminium six-pole crawler wheels for scale rigs

The AW1906H wheel and tyre package is offered as a 2 pcs set and is suited to 1/10 scale crawlers that use 1.9" tyres with a 5mm shaft hole and 12mm hex. The machined aluminium wheel shows a six-pole visual and includes a brass pendulum weight that biases mass downward to help the tyre keep contact during high articulation and low-speed manoeuvres.

The crawler tyre features deep longitudinal channels and a wide footprint to enhance mechanical grip when crawling over rock and technical surfaces. Key dimensions from the source are outer tyre diameter 115mm, inner diameter 48.26mm (1.9"), tyre width 40mm, and a nominal single wheel weight of 100g. The wheel is designed for standard 12mm hex mounting and RC tuning use only.

Fitting advice: confirm your axle shaft is 5mm and the hub uses a 12mm hex, check clearance and backspace, and mount so the brass pendulum weight hangs downwards for the intended effect. Supplied as two pieces per set.

Use these wheels where added wheel mass and aggressive tread help low-speed traction on technical trails; always double-check fitment before installation.