Axial SCX10 II 27mm Wheel Hexs Aluminium SCX2010/275 by GPM [SCX2010/275]

AXIAL Racing SCX10 II Aluminium Wheel Hex Adapters 27mm Width (Use For 4mm Thread Wheel Shaft & 5mm Hole Wheel) - 1pr set - GPM SCX2010/275

Price:

AUD$9.61

Brand:

GPM

Model:

SCX2010/275

GTIN:

4894538252859

Condition:

Brand New

Color Available:

Quantity:

Write a review

alt="AXIAL Racing SCX10 II Aluminium Wheel Hex Adapters 27mm Width (Use For 4mm Thread Wheel Shaft & 5mm Hole Wheel) - 1pr set - GPM SCX2010/275" title="AXIAL Racing SCX10 II Aluminium Wheel Hex Adapters 27mm Width (Use For 4mm Thread Wheel Shaft & 5mm Hole Wheel) - 1pr set - GPM SCX2010/275"

Description
FAQ

27mm wheel hexs for SCX10 II

This set of aluminium wheel hex adapters provides a 27mm overall width to widen your track and deliver better lateral stability on scale crawlers and trail rigs. They are made to be compatible with AXIAL Racing SCX10 II and let you increase wheel spacing without swapping hubs or changing axle geometry.

Each hex accepts wheels with a 5mm centre hole and fits a 4mm threaded wheel shaft, so confirm those dimensions for compatibility. The internal Delrin collar positions the hex and reduces axial play, helping to keep the tyre seated firmly under high traction loads typical in crawling.

Securing hardware is arranged to lock the hex: one side uses an O-ring to preload the assembly, the other side uses a spring-steel retaining ring, a spring with washers, and a stainless screw to clamp everything together. This configuration allows you to adjust retention so wheels stay snug without binding bearing surfaces.

Use these adapters to widen stance for improved cornering and stability on rocky or technical trails, and to limit unwanted wheel rotation when traction is lost on one side. Installation is straightforward for hobbyists using standard hex drivers and common hand tools.

This item is compatible with

AXIAL SCX10 II
AXIAL SCX10 II 90047

Do these need any shims to fit?

In most cases no extra shims are required; the Delrin collar and hardware are designed to locate the hex. Check wheel clearance after fitting and add thin shims if you need a minor adjustment.

Will the adapters survive off-road use?

Yes. The aluminium body with Delrin collar and stainless hardware is built for typical crawling and trail stresses, though normal inspection and maintenance are recommended after heavy runs.