Axial SCX10 Integrated Servo and Panhard Mount - SCX024N by GPM  [SCX024N]

Axial Racing SCX10 Alloy Servo Mount With Panhard Bar - 1set - GPM SCX024N
Price:
AUD$36.42
Brand:
GPM
Model:
SCX024N
GTIN:
4894538129250
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Axial Racing SCX10 Alloy Servo Mount With Panhard Bar - 1set - GPM SCX024N" title="Axial Racing SCX10 Alloy Servo Mount With Panhard Bar - 1set - GPM SCX024N"
alt="Axial Racing SCX10 Alloy Servo Mount With Panhard Bar - 1set - GPM SCX024N" title="Axial Racing SCX10 Alloy Servo Mount With Panhard Bar - 1set - GPM SCX024N"

One-piece alloy servo mount and panhard for SCX10

This aluminium one-piece servo mount brings a panhard bar into a single replacement item for Axial SCX10 platforms. It is intended as an aftermarket option for hobbyists wanting a tidy solution that fixes servo and lateral link positions for realistic crawler steering.

The unit secures the servo to the chassis and supplies a fixed panhard attachment to control lateral axle movement. It is designed for scale and competitive crawling use, so pay attention to link geometry and horn alignment during installation.

Specifications

  • Item: Alloy servo mount with panhard bar, 1 set
  • Material: Alloy
  • Model Number: SCX024N
  • Compatibility: Axial Racing SCX10

Fit this mount to achieve a firm servo mounting point and a stable panhard anchor on SCX10 crawlers; always confirm servo clearance and the panhard link angle to fine-tune lateral tracking.

Do I need to modify my servo horn?

Most standard servo horns will work, but you may need a specific horn orientation or spacer to clear the panhard link and maintain full steering travel.

Is this suitable for competition crawling?

Yes, the mount is aimed at scale and competitive crawling where rigid mounting and predictable lateral control are important for consistent performance.

Will it affect driveline angles?

The mount focuses on servo and panhard positioning; check axle and driveshaft angles after installation to ensure no unwanted binding occurs.

Any advice for initial setup?

Set the servo to centre, attach the horn at neutral, then adjust panhard link length and height while the model sits at normal ride height for best tracking.

Copyright © 2008-2026 rcjaz.com.au All rights reserved