Axial SCX24 +5mm Brass Wheel Hex Adapter for Stance Tuning - JR-SCX2414-BK by Jazrider  [JR-SCX2414-BK]

Axial Racing SCX24 Brass Wheel Hex Hubs Adapter (+5mm Offset)(10g ea.)
Price:
AUD$15.03
Brand:
JAZRIDER
Model:
JR-SCX2414-BK
Condition:
Brand New
Write a review

Adapter for Tuning Stance on SCX24

This adapter is an RC wheel hex hub made for the Axial SCX24 and listed under the part JR-SCX2414-BK. Fabricated from brass and referenced at 10g each in the product name, it provides a fixed +5mm wheel offset per hub to adjust track width and the crawler's stance at 1/24 scale.

As a tuning item, the adapter shifts the wheel mounting point outward to affect clearance and appearance without changing drive train parts. Expect differences in wheel-to-arch spacing and plan for potential adjustments to screw length or wheel inner clearance when fitting the offset.

Fitment advice: slide the adapter onto the existing wheel hex using the vehicle maker's recommended fastening method, check concentricity after tightening, and spin each wheel to confirm no binding or interference before running.

What handling changes can I expect after adding +5mm offset?

You will see a wider track and a flatter stance; depending on tire choice and suspension setup, this can slightly improve lateral stability and the model's visual proportions.

Should I alter wheel choice when using this adapter?

Review wheel backspacing and inner clearance; some wheels with narrow inner wells may need different rims or spacer adjustments to avoid rubbing.

Does offset affect drivetrain or gearing?

The adapter changes mounting location only and does not modify internal gearing, but check for any new contact points and ensure suspension travel is not impeded.

Copyright © 2008-2026 rcjaz.com.au All rights reserved