AXIAL SCX30 Performance 26mm Adjustable Alloy Dampers - SCX30/26FR by GPM  [SCX30/26FR]

AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR
Price:
AUD$25.75
Brand:
GPM
Model:
SCX30/26FR
GTIN:
4894538411027
Condition:
Brand New
Write a review
alt="AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR" title="AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR"
alt="AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR" title="AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR"
alt="AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR" title="AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR"
alt="AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR" title="AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR"
alt="AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR" title="AXIAL SCX30 FORD BRONCO 4X4 RTR BRUSHED ROCK CRAWLER Alloy Adjustable Shock Set 26MM - GPM SCX30/26FR"

CNC 26mm Shock Set Built for Trail Tuning

This aftermarket shock set is made for AXIAL SCX30 scale rock crawlers and provides four 26mm CNC aluminum dampers with three spring rates to tune off-road traction and body control. The kit is intended to replace the referenced factory parts and suits both front and rear mounting positions on compatible SCX30 variants.

Owners can run the dampers dry for a crisper response or fill them with oil for smoother movement; shock oil is not supplied. Because these shocks are compact, small-volume shock tools are recommended for filling and bleeding. The interchangeable springs let you alter preload and ride characteristics quickly.

Packing includes

  • Shock 26mm - 4pcs
  • Silver spring (hard) - 4pcs
  • Gold spring (soft) - 4pcs
  • Pivot Ball 1.4x3.2 - 8pcs
  • Pivot Ball 1.4x4.7 - 4pcs
  • Stainless Steel Round Head Screws M1.4x8 - 4pcs
  • Stainless Steel Round Head Screws M1.4x10 - 4pcs
  • O-ring 4x2x1mm - 4pcs

Original Name / Part No:

AXI-3317,AXI-3325

Compatible Models

  • AXIAL 1/30 SCX30 Ford Bronco 4X4 RTR Brushed Rock Crawler-AXI-2048
  • AXIAL 1/30 SCX30 Jeep Wrangler JLU 4X4 RTR Brushed Rock Crawler-AXI-2261
  • AXIAL 1/30 SCX30 Chevrolet K10 4X4 RTR Brushed Rock Crawler-AXI-2260

Fit these dampers to tune handling on AXIAL SCX30 crawlers, experiment with spring combinations and check stroke and clearance after fitting.

The soft spring increases compliance and traction on rough, low-speed sections; medium provides a balance; hard spring reduces body roll and improves stability on flatter runs. Try each to dial in your preferred feel.
Yes, adjust preload to keep ride height consistent when changing spring rates; small preload changes significantly affect initial suspension response on 26mm shocks.
Mixing rates front-to-rear is a valid tuning approach to alter weight transfer and traction; test in small increments and record settings for repeatability.
Lighter shock oils improve responsiveness while heavier oils add damping control; choose based on trail speed and desired suspension feel, and use small-volume shock tools for filling.
Stiffer springs can limit articulation; check full droop and compression travel after any spring swap to ensure you retain the articulation needed for technical sections.
Start with the medium spring, run dry for a baseline, then try soft with light oil for more traction or hard for stability; adjust preload to maintain desired ride height.

Copyright © 2008-2026 rcjaz.com.au All rights reserved