Axial SCX6 1/6 7075 Aluminum Servo Arm (Steering) - JR-SCX607-TI by Jazrider  [JR-SCX607-TI]

7075 servo arm for Axial SCX6 Jeeps

This steering servo arm fits Axial SCX6 1/6 Jeep platforms and is catalogued as JR-SCX607-TI. The alloy arm is intended to replace weaker plastic arms, giving a more positive connection between the servo and the steering links on trail rigs.

Primary compatibility covers Axial SCX6 Jeep JLU Wrangler 1/6 scale builds; always double-check spline type and mounting hole layout on your servo before installation. Machined from 7075 aluminum, the arm balances stiffness and lightness suited to RC trail use.

Installation guidance: remove the stock arm, align the new arm on the servo spline, and fasten with the original retaining screw or a suitable substitute. After fitting, confirm steering sweep and check that tie-rod clearances and toe settings match your setup targets. This is an aftermarket RC part for steering linkages only.