Axial SCX6 1/6 Steering C-Hub & Knuckle Carrier Set - JR-SCX602-TI by Jazrider  [JR-SCX602-TI]

Upgrade steering pivots for SCX6

This aluminum steering knuckle carrier and C-hub kit is produced for 1/6 scale Axial SCX6 Jeep models and supplied by JAZRIDER as JR-SCX602-TI. It serves as an aftermarket replacement to plastic components for pilots wanting tougher steering hardware and cleaner tuning feedback in trail or rock crawling scenarios.

The components focus on the key pivot interfaces: C-hubs attach to the axle housing while knuckle carriers hold the knuckles and wheel hex. Installing aluminum parts changes wear characteristics and delivers firmer response under load, which assists precise toe, caster, and steering link adjustments on a tuned SCX6.

Installation guidance: use the stock hardware where it fits, adhere to the chassis maintenance procedure, and inspect screw thread engagement before final tightening. If bearings or seals are reused, ensure they seat correctly in the aluminium bores to avoid binding or premature wear.

For constructors refining a scale SCX6 crawler, this aluminium knuckle and C-hub kit is a serviceable upgrade for stiffer steering linkages and easier geometry tuning; confirm compatibility with your wheel hex and bearing stack before final fitment.