Axial SCX6 1/6 Steering Knuckle Carriers and C-Hubs Upgrade JR-SCX602-RD by Jazrider  [JR-SCX602-RD]

Precision aluminum steering carriers and C-hubs

This aftermarket kit replaces the steering knuckle carriers and C-hubs on Axial 1/6 SCX6 Jeep models. Constructed from red anodized aluminum, the parts reduce flex at the knuckle mounts compared with OEM plastic, helping to keep steering geometry more consistent under load.

Fitment is for the Axial SCX6 1/6 Jeep chassis family and is intended as an upgrade option for enthusiasts who prefer metal suspension components. To install, remove the stock carriers and C-hubs and fit the aluminum units into the same mounting locations; confirm steering travel and alignment after assembly to avoid binding or interference.

Switching to aluminum affects front-end stiffness and steering response. Expect a firmer feel and less deformation during impacts or obstacle negotiation. After installing, perform alignment checks and make measured adjustments to steering trim and suspension setup to match driving style.

These aluminum carriers and C-hubs are a stronger replacement for plastic parts on the Axial SCX6 1/6 Jeep series, helping to reduce flex and maintain steering geometry; always verify fit and inspect during fitting.