Axial SCX6 Front Shock Tower (Aluminium, Red) JR-SCX603-RD by Jazrider  [JR-SCX603-RD]

Axial 1/6 SCX6 Jeep Aluminum Front Shock Tower Set (Red)
Price:
AUD$37.21
Brand:
JAZRIDER
Model:
JR-SCX603-RD
Condition:
Brand New
Available in shop
Write a review

Front shock tower for tuning SCX6 suspension

This red-anodised aluminium front shock tower set is an aftermarket upgrade made for the Axial 1/6 SCX6 Jeep JLU Wrangler 4WD platform. The stiffer alloy mounting points improve the repeatability of front suspension responses during tuning sessions.

Intended to replace the stock tower on the SCX6 chassis, the component produces a firmer interface between shock mount points and the chassis plate. That firmer interface reduces unwanted movement and helps retain alignment under load while trail driving.

Installation normally calls for standard hobby tools and basic front clip removal to access the tower fastenings. The item is a chassis-level hop-up and will alter suspension geometry and mounting rigidity rather than affect electronics or the drivetrain.

Specifications

  • Item Aluminum front shock tower set (Red)
  • Material Aluminum
  • Model Number JR-SCX603-RD
  • Compatibility Axial 1/6 SCX6 Jeep JLU Wrangler 4WD

As a machined aluminium upgrade for the SCX6 platform, this front tower aims to provide a robust mounting base for suspension tuning and steadier front-end behavior on challenging terrain.

Will this change how I should set shock valving?

Because the tower reduces flex at the mounting points, you may notice a firmer front response; consider slightly softer valving or spring rates if you want more compliance.

Does the weight of the aluminium affect balance?

Aluminium adds some mass compared with plastic, but the change is small. Expect a modest shift in front-end feel that can be tuned out with spring selection and damping adjustments.

Should I change mounting hardware when fitting this part?

The part is designed to use standard hardware where possible; inspect included fasteners and replace any stripped screws. Using proper torque and threadlocker where appropriate is recommended.

Which model code identifies this tower?

Reference model number JR-SCX603-RD for this aluminium front shock tower set when ordering or checking compatibility.

Copyright © 2008-2026 rcjaz.com.au All rights reserved