Axial SCX6 Steering Upgrade Arm 7075 Aluminum JR-SCX607-BK by Jazrider  [JR-SCX607-BK]

Axial 1/6 SCX6 Jeep 7075 Aluminum Steering Servo Arm (Black)
Price:
AUD$9.88
Brand:
JAZRIDER
Model:
JR-SCX607-BK
Condition:
Brand New
Available in shop
Write a review

Precision steering response for SCX6 rigs

This 7075 aluminum servo arm is intended for the Axial 1/6 SCX6 Jeep platform and is identified as model JR-SCX607-BK. By replacing the factory plastic arm, it reduces compliance in the steering linkages and lets you tune steering geometry with crisper feedback.

Fitment is typically straightforward: remove the stock arm, align the replacement on the servo spline, and secure using the original hardware. Confirm spline compatibility and test steering throws before final use; refer to seller notes for full listing information.

Will this change steering feel?

Yes — the stiffer aluminum arm reduces flex, which tightens steering response and improves the precision of small steering inputs during tuning.

Should I adjust servo endpoints after installing?

Re-calibrate endpoints and center settings after fitting to ensure the steering travel is correct and to avoid binding at the extremes.

Any tuning tips for reduced bump steer?

Check tie-rod lengths and pitman arm position after swapping arms; small adjustments can reduce bump steer when pairing a rigid servo arm with stock link geometry.

Copyright © 2008-2026 rcjaz.com.au All rights reserved