This aluminium upper chassis link set fits AXIAL SMT10 platforms and is supplied as matched front and rear pieces to support chassis tuning and repairs. They are intended as direct replacements for the stock plastic links to provide a firmer mounting point for suspension geometry tweaks without implying real vehicle application.
The stiffer links help maintain more consistent camber and roll centre under load, which assists with handling balance adjustments on Yeti and SMT10 Monster Jam models listed below. The design aims for repeatable alignment and less flex compared with original non-metal parts.
Fitting is straightforward for hobbyists familiar with basic chassis maintenance, using common fasteners and a 3mm lock nut where required. Take care not to over-torque into composite or alloy mating points and use thread locker on steel-to-aluminium joints when the setup is final.
Small hardware from the original packing is included to install the links; verify item counts before fitting and reuse any chassis washers or spacers as needed.
Copyright © 2008-2026 rcjaz.com.au All rights reserved
