Axial Wraith Hardened Main Shaft Set SWR037 by GPM  [SWR037]

Hardened main shaft replacement for Wraith

This hardened steel main shaft is offered as a direct replacement pair for the Axial Racing Wraith drivetrain to support repairs and tuning. It is intended to restore correct drivetrain alignment where the factory shaft has worn or bent.

Constructed from hardened steel to reduce bending under trail and rock-crawling stresses, the shaft should be checked for correct seating in the gearbox and hub bores during installation. Confirm clearance with the spur gear and bearings to ensure the assembly turns freely.

Installation steps: remove the drivetrain to inspect bearings and retainers, fit the new shaft with the same orientation as the removed unit, and test smooth hand rotation before full reassembly. Use these parts as replaceable wear items when servicing the transmission after heavy use.

Choose this shaft set to correct drivetrain geometry or to replace worn transmission components on Axial Wraith models, and inspect related parts for proper condition during service.