Axial Wraith Heat Sink Motor Plate Upgrade for Cleaner Mounting - AW-23019-BK by Jazrider  [AW-23019-BK]

Axial Racing Wraith Aluminum Motor Plate w/ Heat Sink
Price:
AUD$4.98
Brand:
JAZRIDER
Model:
AW-23019-BK
Condition:
Brand New
Available in shop
Write a review

Precision motor plate for Wraith

This aluminum motor plate is produced for the Axial Wraith chassis and is listed by JAZRIDER as model AW-23019-BK. It pairs a machined mounting face with integrated heat-sink fins to help control motor temperatures while offering a lower-profile mounting area. The unit is finished in black to suit common Wraith builds.

The item fits within the Axial Wraith family and replaces the original motor mounting surface while keeping the established motor screw pattern used on Wraith-style setups. Installation normally reuses stock motor screws; ensure correct motor positioning and gear mesh before tightening to final torque.

From a setup and tuning standpoint the plate brings passive thermal management and a more rigid platform that can reduce movement and simplify wiring and ESC clearance. It aims to improve thermal behavior and component packaging rather than altering motor electrical characteristics.

The plate keeps the same motor screw pattern, but because the mounting plane is firmer and lower-profile you should recheck gear mesh during installation and tighten progressively to ensure correct alignment.
Yes, the lower-profile mount can tidy motor placement and simplify routing of ESC leads and wiring, but always mock-fit components to confirm clearances in your particular chassis layout.
Trimming is rarely required; most installations use existing wiring lengths. If your setup has large connectors or unconventional routing, check for clearance and adjust as needed before final assembly.

Copyright © 2008-2026 rcjaz.com.au All rights reserved