This aluminum C hub carrier is produced to fit Axial Wraith chassis using model AW-23012-GR. It substitutes the factory plastic carrier with a metal unit to boost structural strength and reduce long-term wear in technical crawling.
Installation follows the normal replacement steps: take off the wheel hub and old C hub, transfer bearings and seals as required, then attach the aluminium carrier with the original screws. Confirm thread depth and alignment, and review steering geometry after installation because a stiffer carrier can modify rack response.
In setup terms the alloy carrier tightens steering feedback and improves repeatability under load; note that increased stiffness can place extra load on linkage points and bearings, so include those checks in your maintenance routine.
Copyright © 2008-2026 rcjaz.com.au All rights reserved
