Axial Yeti Off-Road Hex Wideners +10mm Delrin DYT010/+10MM by GPM  [DYT010/+10MM]

Delrin wheel spacers for Yeti hubs

This axle hex spacer pair fits the Axial Racing Yeti platform and is supplied in Delrin as a 2 pcs set with +10mm thickness to move wheel offset outward. The parts are intended for model use to alter track width and clearances.

Functionally each widener pushes the wheel mounting face out by 10mm per side, affecting tyre clearance, potential rubbing with suspension or bodywork, and the vehicle's handling balance. They are useful when you need to fine tune cornering or stop wider tyres and beadlocks from making contact with the body.

Fitting to the Yeti hex hub is quick: remove wheel and stock hex, slide the Delrin widener on the hub, then reinstall the wheel and fasteners. Confirm thread engagement and wheel centring, and check for any contact with suspension or bodywork before running the model.