Axial Yeti Wheel Hub Adapters 22mm Thickness for 2.2 Wheels YT022C by GPM  [YT022C]

22mm hub adapters for 2.2" Axial wheel setups

This aluminium wheel hub adapter set is made to shift wheel offset on 2.2" wheel builds. Sold as a single pair, the adapters add lateral spacing between the wheel and hub so you can alter track width and stance without cutting hubs or changing axle hardware.

The adapters are specified as aluminium and 22mm thick for platform use, serving as a straightforward tuning part for clearance and handling tweaks on rock racers and crawlers. How they affect handling will depend on tyre choice, wheel backspacing and suspension setup, so check wheel-to-link and wheel-to-shock clearances before running.

Fitting is a basic hub change: remove the wheel, unfasten the stock hub or wheel hex as applicable, place the adapter on the hub or axle per chassis layout, then refit wheel hardware and check rotational clearance and hex engagement. Use the correct hex screws and verify bearing alignment after fitting to prevent binding issues.