Axial Yeti XL 20T Steel#45 Diff Gear YTL1202S/G3 Replacement by GPM  [YTL1202S/G3]

Axial Racing Yeti XL Steel#45 Differential Gear 20T - 2pcs - GPM YTL1202S/G3
Price:
AUD$22.76
Brand:
GPM
Model:
YTL1202S/G3
GTIN:
4894538213300
Condition:
Brand New
Write a review

20-tooth Steel#45 diff for Yeti XL repairs

The YTL1202S/G3 Steel#45 20T differential gears are made for the Axial Racing Yeti XL and function as direct replacements or heavy-duty spares to restore drivetrain tooth faces.

During fitment, set proper gear mesh and check backlash with the existing spur and pinion before locking hardware. If your chassis guide calls for thread locker, apply it to the retaining screws, and confirm bearings rotate freely to reduce the risk of uneven wear. This component is aimed at enhancing drivetrain durability rather than altering drive ratios or scale behaviour.

Specifications

  • Item Differential Gear 20T - 2pcs
  • Material Steel#45
  • Model Number YTL1202S/G3
  • Compatibility Axial Racing Yeti XL

Select this pair of Steel#45 gears when you need a reliable steel option to replace worn diff teeth or for scheduled drivetrain maintenance on the Yeti XL chassis.

Will YTL1202S/G3 require modding to fit?

These gears are produced to match Yeti XL diff geometry. If your differential has standard layout and tooth count, no modification should be necessary.

Any break-in needed for steel diff gears?

A short, light break-in run under low load helps seat the teeth and grease. Recheck mesh and fastener torque after the initial run.

Do these gears affect drivetrain noise?

When correctly meshed and lubricated, steel gears should not introduce excessive noise; improper mesh or damaged bearings are more likely causes of unwanted sound.

Copyright © 2008-2026 rcjaz.com.au All rights reserved