Axial Yeti XL Aluminum Steering Knuckles YTL-25000 by Jazrider  [YTL-25000]

Front-end knuckle upgrade for Yeti XL

The YTL-25000 front knuckles are an aluminum replacement set created for the Axial Yeti XL steering system. These machined parts stiffen the mounting point compared with stock plastic knuckles to reduce flex and help the suspension hold its geometry during aggressive driving.

When compatible, the knuckles swap straight in and can be used as a tuning item to alter steering feel and caster stability. Supplied as a left and right set; always verify compatibility with your hub carriers and steering link lengths prior to installation.

Installation notes: these arms mount to existing front hub carriers and normally use the stock fasteners and linkage positions on Yeti XL models. Major trimming is not expected for typical setups, but check for any interference with wheels or C-hubs after fitting. Routine inspection of pins and bearings will keep the front end operating smoothly.

Compatible Models

• Axial Yeti XL

Install these knuckles to stiffen the front end and provide a more stable platform for steering adjustments; maintain proper torque and bearing condition to prevent accelerated wear.