AXIAL YETI XL Centre Gearbox Case YTL038 - Upgrade Part by GPM  [YTL038]

AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038
Price:
AUD$95.75
Brand:
GPM
Model:
YTL038
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038" title="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038"
alt="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038" title="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038"
alt="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038" title="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038"
alt="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038" title="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038"
alt="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038" title="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038"
alt="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038" title="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038"
alt="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038" title="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038"

Replacement aluminium centre transmission case for YETI XL

This aluminium centre transmission case is an aftermarket replacement crafted for the AXIAL Racing YETI XL platform. It provides the main housing for the central gearbox components in scale electric off-road builds, delivering a stiffer mounting face for gears and bearings while following the stock layout for straightforward fitment.

Typical installation requires removal of the original plastic housing, transfer of internal gears and bearings, then securing the new case with the supplied stainless hardware. During reassembly confirm correct gear mesh, align shafts and bearings, and tighten fixings in stages to prevent misalignment. The aluminium build is intended to support maintenance, chassis tuning and improved structural support.

Packing includes

  • Stainless Steel Counter Sink Flat Head Screw 3X25 - 4pcs
  • Stainless Steel Counter Sink Flat Head Screw 3X18 - 7pcs
  • Stainless Steel Counter Sink Flat Head Screw 3X16 - 3pcs
  • Stainless Steel Counter Sink Flat Head Screw 3X14 - 3pcs
  • Stainless Steel Button Head Screw 2.5X8 - 3pcs

Specifications

  • Item: Aluminium center transmission case
  • Material: Aluminum
  • Model Number: YTL038
  • Compatibility: AXIAL Racing YETI XL

Install this case during routine servicing or when upgrading chassis support to reduce flex and extend component life; verify alignment and torque settings at final assembly.

Does this require machining to fit?

No machining is typically needed since the part mirrors the stock geometry, but check individual parts and driving shaft alignments to be sure.

Is hardware sufficient for mounting?

The supplied stainless screws cover the common mounting points and internal securing needs as shown in the packing include list.

Will this change driveline noise?

Higher rigidity can reduce unwanted movement that causes noise, but correct mesh and bearing condition are also important for quiet operation.

Can I clean it with solvents?

Use mild solvents and a soft brush for cleaning; avoid aggressive chemicals that might affect finishes or interfere with bearings.

Copyright © 2008-2026 rcjaz.com.au All rights reserved