Axial Yeti XL Steel #45 Bevel 48p 11T - YTL1202S/G2 by GPM  [YTL1202S/G2]

Axial Racing Yeti XL Steel#45 Bevel 48p Gear 11T - 1pc - GPM YTL1202S/G2
Price:
AUD$26.31
Brand:
GPM
Model:
YTL1202S/G2
GTIN:
4894538213164
Condition:
Brand New
Write a review

Service bevel for Yeti XL gearboxes

This bevel gear is specified for Axial Yeti XL drivetrains and is supplied as a single replacement component. The description reflects Steel #45 material and an 11-tooth 48 pitch profile suitable for standard hobby repairs and tuning.

Install this gear when repairing the Yeti XL internal gear train or replacing a worn bevel during scheduled maintenance. The piece only engages with internal drivetrain components; confirm correct 48p matching with pinion and spur gears and check mesh and bearing condition on reassembly.

Specifications

  • Item: Bevel gear 11T - 1pcs
  • Material: Steel #45
  • Model Number: YTL1202S/G2
  • Compatibility: for Axial Yeti XL

Designed to replicate the stock profile for YTL1202S/G2, this bevel is suitable for straightforward swap-in service on Yeti XL models; always verify gear mesh and use correct shimming for best results.

Do I need special tools to fit this gear?

Basic hobby tools are sufficient for most installs, but a dial indicator or feeler gauges help set backlash and axial play accurately.

Will this change drivetrain noise?

If mesh and bearing condition are correct, noise should be similar to stock; improper mesh or damaged bearings increases audible noise and wear.

Is the gear pre-lubed?

Parts are typically supplied dry; apply an appropriate light gear grease or oil to mating surfaces during assembly as recommended for your setup.

What should I inspect after fitting?

After installation, run the drivetrain slowly to check for binding, verify smooth rotation, and recheck shim spacing and bearing preload.

Copyright © 2008-2026 rcjaz.com.au All rights reserved