Bandai 5061149 - Gundam Decal Set for MS Zeon 0080 Series 1/100 MG & 1/144 HG No.54 - Emblem and Marking Set  [B-5061149]

Bandai 5061149 - Gundam Decal Set for MS Zeon 0080 Series 1/100 MG & 1/144 HG No.54
Price:
AUD$10.58
Brand:
Bandai
Model:
B-5061149
Condition:
Brand New
Write a review

Accurate MS Zeon 0080 Emblems from Bandai

Enhance your MS Zeon 0080 kits with these Bandai water slide decals tailored for Master Grade 1/100 and High Grade 1/144 models. The sheets include faction marks and small stencils that help complete a realistic finish.

Fine Detail and Durable Printing

Decals are printed to hold fine line work and small lettering while using a minimal carrier film to keep edges unobtrusive. This helps achieve a painted-on appearance after setting and sealing.

Practical Application Workflow

Soak decals briefly to free them from the backing, then manoeuvre them into place with fine tweezers or a brush. Apply decal solvent to encourage the film to settle into curvature and panel recesses, then trim any excess film for a clean result.

Specifications

  • Scale Compatibility: 1/100 MG, 1/144 HG
  • Application Type: Water Slide
  • Designs: MS Zeon 0080 Series Specific

This Bandai decal set is a useful upgrade for builders aiming for authentic markings and clean panel detail. It works well for conversion projects, dioramas and standard kit builds.

Are these decals solvent resistant?

Once properly set and sealed with a compatible clear coat, the decals resist handling and mild solvent exposure from weathering washes.

Can I reposition a decal after it touches the surface?

Minor repositioning is possible while the decal film is still wet, but repeated moves can damage edges. Work carefully and use a wet brush to aid sliding.

Do I need to remove backing film first?

The backing film should stay with the decal until soaked and released. Avoid peeling decals dry, as that can deform delicate markings.

What surface finish is best before applying?

A gloss or semi-gloss finish helps decals adhere smoothly; matte surfaces can trap air and increase silvering unless a gloss layer is applied first.

Can I cut decals to fit custom layouts?

Yes, trimming with sharp micro scissors is common to adapt decals to custom panels or to reduce excess carrier film for neater edges.

Copyright © 2008-2025 rcjaz.com.au All rights reserved