Bantam CSEAC111 E-Station 701 Charger Lead 8-Pin  [CSEAC111]

Workshop 8-Pin Charger Lead

This Bantam CSEAC111 8-pin connection cable is an accessory to link an E-Station 701 charger with a device under test or to a charge adapter. It offers a straightforward connection between charger and battery harness without altering charger electronics or settings.

The cable is suitable for bench charging, connector swaps, or routing power from a charger to a custom adapter harness. Installation is generally plug-and-play: line up the 8-pin mating faces, press the connector in without force, and verify retention before powering up. Double-check alignment to prevent pin damage during insertion.

Maintain the cable by keeping contact faces clean, avoiding sharp bends at the plug exit, and storing it coiled without tight kinks. When working on a bench, secure the lead so it cannot be yanked from the charger socket by accident.

In setup and tuning workflows the cable acts as a handy utility: it speeds charger relocation, eases connection to test rigs, and helps manage power routing between charger and support equipment. It is not a diagnostic device but facilitates charging and bench preparation tasks.