Battery Balancing Holder for Shorty Packs Tungsten +100g - Arrowmax AM-950041  [AM-950041]

Arrowmax AM-950041 Battery Holder Set For Shorty Batteries Tungsten Copper (+100g)
Price:
AUD$134.41
Brand:
Arrowmax
Model:
AM-950041
Condition:
Brand New
Write a review

Shorty battery bracket with integrated tungsten weight

The Arrowmax AM-950041 battery holder set secures Shorty-format battery packs and adds a tungsten-copper +100g weight to aid chassis centre tuning. It is aimed at tuners and club racers who adjust weight distribution to refine grip, turn-in and traction on 1/10 scale race and touring cars.

The bracket gives a stable mount for Shorty cells, and the additional mass serves as intentional ballast rather than a structural component. Fitment concentrates on holding the battery in place under acceleration and impacts while providing a clear method to shift the centre of gravity without cutting or welding the chassis.

Installation is typically quick: locate the Shorty pack in the bracket, fasten with the holder's mounting points and confirm wiring clearance so nothing is trapped. Experiment with the ballast position relative to the motor and suspension - small fore and aft adjustments can produce noticeable handling changes.

Specifications

  • Item: Battery Holder Set
  • Material: Tungsten Copper
  • Model Number: AM-950041
  • Compatibility: Shorty battery packs for RC models

As a practical setup tool, the Arrowmax AM-950041 combines a secure Shorty holder with a +100g tungsten-copper mass so builders can dial in balance without permanent chassis modification.

Do I need special tools to fit the holder?

Standard hobby tools are usually enough - small screwdrivers and hex drivers to secure the mounting screws and position the Shorty pack correctly.

Will the extra 100g make my car slower?

Adding weight changes dynamics rather than speed; it can improve cornering balance but may slightly affect acceleration depending on the car and track.

Any setup advice for track testing?

Move the weight in small increments and run repeatable laps. Log differences in understeer or oversteer to determine the best placement for your suspension and tyre choice.

Is the tungsten copper material corrosion resistant?

Tungsten-copper is dense and stable for ballast use; treat exposed metal like any part and avoid prolonged moisture exposure to keep mounting surfaces clean.

Can I use this on non Shorty batteries?

The holder is designed for Shorty-format packs. If your pack is larger, the tray may not secure it properly without modification or a different holder.

Copyright © 2008-2026 rcjaz.com.au All rights reserved