BD7 Aluminum 44mm Dogbone Rear C-clip Shaft - Yokomo B7-010RA  [B7-010RA]

Yokomo B7-010RA C-clip Rear Universal w/Aluminum 44mm bone for BD7
Price:
AUD$20.04
Brand:
Yokomo
Model:
B7-010RA
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - BD7 category
Write a review

Aftermarket BD7 rear universal C-clip shaft

The Yokomo B7-010RA rear universal shaft features a 44mm aluminum dogbone made for BD7 applications. It is offered as a direct-replacement rear dogbone assembly using C-clip retention suitable for RC-scale drivelines.

Lightweight aluminum construction helps retain correct rear geometry while making routine service straightforward. The box contains 2 pcs, one for each side of the rear axle.

Verify axle diameter and hub mating before installing. Installation generally requires removing the stock dogbones and C-clip retainers, fitting the aluminum bone into the outdrives, and securing the C-clips. After installation, check for full suspension travel and wheel clearance to ensure no binding occurs.

Compatibility

  • MRTC-BD716O
  • MRTC-BD716S
  • MRTC-BD716
  • MRTC-BD716H
  • MRTC-BD8
  • MRTC-BD8A
  • MRTC-BD8-P
  • MRTC-BD8AP
  • MRTC-BD8SV
  • MRTC-BD818A
  • MRTC-BD818
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this change rear handling feel?

The stiffer aluminum bone can tighten rear response and reduce flex in the driveline, affecting rotation and mid-corner stability. Test incremental changes to balance the car.

What models are covered by the compatibility list?

This shaft is listed for MRTC-BD716O, MRTC-BD716S, MRTC-BD716, MRTC-BD716H, MRTC-BD8 and its variants MRTC-BD8A, MRTC-BD8-P, MRTC-BD8AP, MRTC-BD8SV, plus MRTC-BD818A and MRTC-BD818.

Setup tips after fitting?

After fitting, re-check toe and camber under load, verify no binding during suspension travel, and run a brief test to assess changes to rotation and traction.

Copyright © 2008-2026 rcjaz.com.au All rights reserved