BD7 Compatible M2 x 5mm Cap Screw (3.2mm head) - YOKZCC25M by Yokomo  [YOKZCC25M]

Yokomo ZC-C25M - Cap Screw M2 x 5mm (3.2Head/8pcs) for BD7
Price:
AUD$9.02
Brand:
Yokomo
Model:
YOKZCC25M
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Fastening screws tailored for BD7

This RC-scale accessory is a set of cap screws specified as M2 x 5mm with a 3.2mm head diameter and hex socket drive, supplied in an 8pcs pack for the BD7 platform. The parts are intended for chassis fastening and routine upkeep where small, reliable fasteners are needed.

These screws are listed specifically for BD7 fitment in the product name; do not assume compatibility with other chassis unless the hole diameter and thread engagement match. Use the correct hex driver size to prevent rounding the socket while tightening or loosening.

For setup and tuning work these cap screws provide reliable fastening for suspension brackets, gearboxes and body mounts on BD7 chassis areas where M2 fasteners are required. Carry spares to minimise repairs between runs.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will changing to different head sizes affect clearance?

The 3.2mm head diameter determines clearance in countersunk or recessed mounts. Swapping to a larger head may cause interference, so verify fit before changing head size.

Do these screws influence handling when swapping components?

Fastener choice mainly affects mechanical security rather than handling; ensure screws are the correct length and tightness to maintain component alignment during tuning adjustments.

Is it OK to reuse screws from old assemblies?

Reuse is possible if the head and threads are intact. Replace any screws with rounded sockets or damaged threads to avoid failure during runs.

Copyright © 2008-2026 rcjaz.com.au All rights reserved