BD7/BD5 Compatible Steering Bell Crank 5mm Bore - BD-202S5 Yokomo  [BD-202S5]

Yokomo BD-202S5 Asttering Bell Crank 5mm for BD7/BD5
Price:
AUD$9.27
Brand:
Yokomo
Model:
BD-202S5
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Tuning-focused bell crank details

The BD-202S5 is a steering linkage bell crank with a 5mm bearing bore tailored for Yokomo BD7 and BD5 1/10 on-road chassis. It functions as the main pivot in the front steering setup and is aimed at drivers refining handling.

Compatibility targets BD7 and BD5 chassis where the steering post accommodates a 5mm bearing. Replacing the standard bell crank with this part gives a repeatable bearing mount and consistent pivot motion without altering stock steering geometry.

Fitting is direct for those familiar with RC maintenance: remove the factory bell crank, move over any spacers or clips, and secure the BD-202S5 to the steering post with the existing fasteners. Confirm smooth rotation and correct linkage angles before track use.

From a tuning standpoint, the bearing interface reduces pivot friction and stabilises steering inputs, making setup changes more predictable when adjusting toe or steering rate. Use it as part of incremental tuning steps.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

In what ways does the BD-202S5 alter steering behaviour?

The bearing-equipped pivot reduces binding and gives a cleaner, more predictable steering response, which helps when dialing in steering sensitivity and return-to-center characteristics.

Should I change other steering parts when installing this bell crank?

You can often keep existing linkages and hardware, but inspect tie rods and ball ends; replacing worn items alongside the BD-202S5 ensures the best tuning consistency.

Is this part useful for fine steering adjustments?

Yes, the stable bearing pivot makes small setup changes more repeatable, so it is useful when making fine adjustments to toe, steering ratio, or feel.

Copyright © 2008-2026 rcjaz.com.au All rights reserved