B-Max4 Servo Mount Upgrade, Aluminium - Yokomo YOKBM200L  [YOKBM200L]

Yokomo BM-200L - BMax4 Aluminium Servo Mount
Price:
AUD$27.19
Brand:
Yokomo
Model:
YOKBM200L
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Aluminium servo mounting plate for B-Max4

This aluminium servo mount is a direct-fit replacement for the B-Max4 chassis that creates a solid mounting surface for standard RC servos on this platform. It is intended to minimise movement at the servo fixing points so the servo remains correctly positioned during suspension travel.

As an aluminium component it is stiffer than many stock polymer mounts, which helps preserve steering geometry during dynamic loads and makes trim adjustments more predictable.

Fitting the plate is straightforward for people familiar with B-Max4 servicing: it uses the original mounting locations. When replacing the stock part, verify servo horn clearance and linkage geometry before finalising steering endpoints.

Specifications

  • Item: Servo mount
  • Material: Aluminium
  • Model Number: YOKBM200L
  • Compatibility: B-Max4 chassis

Use this aluminium upgrade to reduce servo mounting flex on the B-Max4 chassis and to aid consistent steering setup and handling.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What is the recommended fitting procedure?

Remove the stock servo mount, align the YOKBM200L in the same position, and secure using the original screw points. Confirm servo horn clearance before tightening all fasteners.

Should I use threadlocker on the screws?

Light threadlocker on metal-to-metal fastenings is recommended for racing or heavy use to keep screws secure without making future removal difficult.

Any clearance checks needed after fitting?

After installation, cycle the suspension and check servo horn and linkage travel through the full range to avoid binding before setting endpoints.

Can I reuse the stock screws?

Yes, the original mounting screws are typically suitable; replace any worn fasteners to ensure a secure fit.

Copyright © 2008-2026 rcjaz.com.au All rights reserved