Bulkhead Brace for Serpent Medius X26 - Graphite O-SPP004 by Factory Pro  [FP-O-SPP004]

This graphite bulkhead brace, produced by Factory Pro for the Serpent Medius X26, is an aftermarket reinforcement aimed at drivers who want crisper handling from their touring car. It mounts to the Medius X26 bulkhead region to influence chassis flex during turns and weight transfer.

By stiffening the bulkhead junction the brace changes how flex is distributed through the chassis. Drivers can use this to tune the front-to-rear grip balance without touching suspension geometry. It works best when combined with measured adjustments to shocks and anti-roll settings.

To fit the brace, follow standard Medius X26 disassembly: remove the body where required, unbolt the existing bulkhead fixings, place the graphite plate, and fasten using the original hex screws. Always recheck clearance around driveshafts and linkages after installation.

This product is designed solely for the Serpent Medius X26 chassis; confirm your chassis code before purchase. It is an RC part and not intended for any full-scale vehicle application.