CC02 G500 Wheel Weight and 12.5mm Hex Set CC2023+12.5 for Tamiya by GPM  [CC2023+12.5]

Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5
Price:
AUD$95.75
Brand:
GPM
Model:
CC2023+12.5
GTIN:
4894538339246
Condition:
Brand New
Write a review
alt="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5" title="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5"
alt="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5" title="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5"
alt="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5" title="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5"
alt="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5" title="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5"

Wheel hub pendulum weights and reinforced driveline for CC02

This kit for the Tamiya CC02 MERCEDES-BENZ G500 outfits the hubs with brass pendulum weights, fits 12.5mm wider hex adaptors and supplies hardened front and rear driveline components aimed at climbing and trail use. The pendulum weights add unsprung mass low on the hub, the hex adaptors widen the stance by approximately 12mm, and hardened steel driveline pieces replace select stock items for improved wear resistance.

Packaged as a set of grouped parts, the 20-piece kit is intended to be fitted to CC02 chassis vehicles to enhance tyre contact and vehicle balance when crawling over uneven terrain. Installation focuses on wheel hub swaps and driveline replacements using standard CC02 mounting points.

Specifications

  • Item: 20 pcs set including pendulum weights, front CVD joints, rear drive shafts, 12.5mm wider hexes, pins and E-clips
  • Material: Brass pendulum weights, Hardened Steel #45 front CVD joints, stainless steel pins, Delrin collar bearings
  • Model Number: CC2023+12.5
  • Compatibility: Tamiya CC02 MERCEDES-BENZ G500
  • Weight: Single pendulum with bearing approximately 119 grams

Fit this upgrade to bias weight toward the wheels, widen the track slightly for better stability, and install hardened driveline parts to keep consistent crawling performance on CC02 machines.

Is trimming required for some bodies?

Some low clearance bodies may need minor trimming once the 12.5mm hex adapters are fitted; check wheel rotation and tyre clearance before finalising the install.

Do the weights affect centre of gravity?

The added mass sits low at the hub, which helps tyre contact and roll control during crawling, though it will slightly shift unsprung mass and change dynamic response on smooth terrain.

What tools are needed for installation?

Basic tools such as hex drivers, pliers and a small hammer for pins are typically all you need; the kit includes pins and E-clips so no extra replacement hardware should be required for stock CC02 mounting.

Will these parts increase maintenance?

Pendulum bearings and collars should be checked periodically for dirt and wear; hardened driveline parts reduce breakage but regular inspection is advised for long term reliability.

Can I run these on other CC02 variants?

Parts are designed around CC02 wheel mounting geometry; compatibility with other CC02-based bodies is likely but confirm wheel hub and shaft dimensions before fitting to non-standard variants.

Copyright © 2008-2026 rcjaz.com.au All rights reserved