Cero Knuckle Ver.2 SAK-C141/V2 — Front Steering Replacement for Cero by 3Racing  [SAK-C141/V2]

Key points about the Ver.2 Cero Knuckle

The SAK-C141/V2 Cero Knuckle Ver.2 is crafted as a direct-fit steering knuckle for Cero-style setups. Its focus is on steering pivot placement and front suspension response while leaving drivetrain and motor interfaces unchanged.

The knuckle establishes the wheel hub position, steering axis, and scrub radius. The Ver.2 pivot geometry update aims to deliver a more predictable steering characteristic under braking and during corner entry. It is intended for 1/10 scale electric touring and pan car chassis using the Cero knuckle arrangement.

Installation follows standard procedures: remove hub and tie rods, replace the knuckle with the Ver.2 component, then reinstall bearings, hub, and steering links. After installation, confirm steering geometry, link lengths, and bearing alignment to prevent binding.

For setup, changes to camber and steering feel are best addressed through shock mounting and anti-squat adjustments, along with swaybar tuning, instead of modifying the knuckle geometry itself.