Compatible with TRAXXAS JATO 4X4 VXL 7075-T6 Motor Mount TJ036 by GPM  [TJ036]

TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036
Price:
AUD$39.94
Brand:
GPM
Model:
TJ036
GTIN:
4894538405835
Condition:
Brand New
Write a review
alt="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036" title="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036"
alt="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036" title="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036"
alt="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036" title="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036"
alt="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036" title="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036"
alt="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036" title="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036"
alt="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036" title="TRAXXAS JATO 4X4 VXL 7075-T6 Alloy Bearing Motor Mount - GPM TJ036"

Performance motor mount for TRAXXAS JATO 4X4 VXL Low-CG kits

The TJ036 motor mount is an aftermarket component designed for TRAXXAS JATO 4X4 VXL vehicles that use the Low-CG chassis option. Built from 7075-T6 aluminium, the unit incorporates a strengthened bearing seat and upgrades the original bearing to an oversized 10x19x5mm part to enhance motor plate rigidity and main shaft support under brushless power.

The product ships assembled with the included hardware and targets reduced flex and lower bearing fatigue during prolonged runs. It is not compatible with the stock JATO chassis.

Packing includes

  • Motor Mount - 1pcs
  • Oversized Bearing 10x19x5mm - 1pcs
  • Shoulder Screws - 1pcs
  • Grade 12.9 black Round Head Screws 4x10 - 2pcs
  • Grade 12.9 black Round Head Screws 3x10 - 4pcs
  • Grade 12.9 black Flat Head Screws 3x6 - 1pcs
  • Grade 12.9 black Cap Head Screws 3x12 - 1pcs
  • Stainless Steel Gasket 3 x 6 x 0.2 mm - 1pcs
  • M3 Gasket - 1pcs

Original Name / Part No:

7460,7460A

Compatible Models

  • TRAXXAS 1/8 JATO 4X4 VXL BRUSHLESS-90386-4
  • TRAXXAS 1/8 JATO 4X4 BL-2S-90154-4
  • TRAXXAS 1/10 RUSTLER 4X4 VXL-67076-4
  • TRAXXAS SLASH 4X4 LOW-CG-68086-21
  • TRAXXAS 1/10 FORD FIESTA ST RALLY VXL-74276-4
  • TRAXXAS 1/10 FORD FIESTA ST RALLY BL-2S-74154-4
  • TRAXXAS 1/10 RUSTLER 4X4 BL-2s Stadium Trucks-67164-4
  • TRAXXAS 1/10 RUSTLER 4X4 VXL Stadium Trucks-67376-4
  • TRAXXAS 1/10 RUSTLER 4X4 VXL Ultimate Stadium Trucks-67097-4
  • TRAXXAS 1/10 SLASH 4X4 VXL Ultimate Short Course Trucks-68277-4

TJ036 is aimed at hobbyists seeking a firmer motor mounting solution for Low-CG JATO and related 1/10 variants, using an oversized bearing to improve lifespan under brushless torque; install with medium-strength threadlocker and verify mounting clearance before high-power testing.

Does this mount work with the standard JATO chassis?

No, TJ036 is specific to Low-CG chassis variants and will not fit the stock JATO configuration.

Are all screws included in the kit?

Yes, the packing list shows every fastener included and the mount is supplied pre-assembled.

Will the oversized bearing reduce maintenance?

A larger bearing can improve load distribution and slow wear, but periodic inspection and lubrication remain important.

What torque or threadlocker should I use?

Use medium-strength threadlocker on metal screws and tighten to factory guidance for similar fasteners; avoid over-torquing the aluminium mount.

Copyright © 2008-2026 rcjaz.com.au All rights reserved