This soft compound grease is produced as an accessory for D-MAX slipper clutches to fine-tune engagement feel. It is not intended as a substitute for gear or bearing lubricants in the transmission.
Apply a controlled, thin amount to the plate contact surfaces; the soft formula offers milder initial bite and helps reduce sudden slipping that causes chatter. Work in small increments and test after each change to avoid introducing excess drag.
Fitting is simple: thoroughly clean contact areas, place a small film where plates meet, reassemble, then bench-test before running on track. Keep the lubricant away from electronics and sealed components to avoid contamination.
For routine care, remove any accumulated residue periodically and reapply during tuning sessions as needed. Store with the lid closed at room temperature to preserve consistency.
Copyright © 2008-2026 rcjaz.com.au All rights reserved