DP/YD2 Drift Slide Rack - Y2-202SLB Yokomo  [Y2-202SLB]

Yokomo Y2-202SLB jp
Price:
AUD$185.64
Brand:
Yokomo
Model:
Y2-202SLB
GTIN:
639342173693
Condition:
Brand New
Write a review
alt="Yokomo Y2-202SLB jp" title="Yokomo Y2-202SLB jp"
alt="Yokomo Y2-202SLB jp" title="Yokomo Y2-202SLB jp"

Tune steering response with an alloy slide rack

This slide rack set uses black anodized aluminum for the integrated bulkhead and slide rail, with machining to remove excess material from the front area. The combination of lower weight and a stiffer bulkhead changes front-end behavior, delivering quicker steering response for drift-focused setups.

On resin chassis the bolted-in bulkhead increases local stiffness at the nose, helping to prevent the front tyre from grabbing at entry and making turn-in more repeatable. The forward tilt produces an Ackermann-like effect that suits drift use, smoothing steering-angle transitions during slides.

Fitting is routine for technicians familiar with DP-series and YD2 models; the part swaps in for the stock front bulkhead and slide rack. After installation, small toe and caster adjustments are recommended to rebalance steering feel since the stiffer assembly can alter feedback.

Specifications

  • Item: Slide rack set
  • Material: Black anodized aluminum
  • Model Number: Y2-202SLB
  • Compatibility: Multiple Yokomo DP-series and YD2 chassis (see Compatibility section)

Compatibility

  • DP-GR86
  • DP-GR86G
  • DP-GR86RTRG
  • DP-GR86RTRW
  • DP-GR86W
  • DP-GRA90
  • DP-GRA90R
  • DP-GRA90W
  • DP-YD2
  • DP-YD2AC
  • DP-YD2ACA
  • DP-YD2E
  • DP-YD2EG
  • DP-YD2EPLS
  • DP-YD2EX
  • DP-YD2G
  • DP-YD2PLS
  • DP-YD2RAB
  • DP-YD2RPLS
  • DP-YD2RSAB
  • DP-YD2RTRR-1
  • DP-YD2RTRR-2
  • DP-YD2RTRW-1
  • DP-YD2RTRW-2
  • DP-YD2RX
  • DP-YD2S
  • DP-YD2S-PL
  • DP-YD2SAB
  • DP-YD2SG
  • DP-YD2SSAB
  • DP-YD2SX3
  • DP-YD2Z
  • DP-YD2ZG
  • DP-YD2ZX
  • RDR-010
  • RDR-010-1
  • RDR-010G
  • RDR-010G-1
  • RDR-020
  • RDR-020G
  • DPR-GRA90W
  • DPR-GRA90R
  • DPR-GR86G
  • DPR-GR86W
  • DPR-DP
  • DPR-RZ34BL
  • DPR-RZ34R
  • DP-RZ34
  • DP-RZ34BL
  • DP-RZ34R
  • DP-MS15
  • DP-JZXBN
  • DP-MS15BL
  • DPR-MS15
  • DP-RS13SP
  • DP-FCBN

Select the Y2-202SLB to firm up the front end and bias the rack geometry toward drift steering; the alloy construction trims weight while adding rigidity to refine turn-in and maintain stability in slides.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How should I adjust toe after fitting this rack?

Begin with small toe-in changes and test on-track; the increased front stiffness often benefits from slightly more toe to stabilise turn-in under drift load.

Does caster need changing for better angle control?

Minor caster increases can help maintain steering authority at higher angles; make incremental adjustments and evaluate steering weight and recovery.

Will this rack affect roll and understeer balance?

A stiffer front reduces unwanted flex, which can reduce perceived understeer during entry; tuning springs and anti-roll balance may be required to match the new feel.

Is steering throw impacted by the forward angle?

The forward rake alters steering geometry to a more drift-oriented profile, which can produce smoother transitions rather than abrupt steering throws.

Any recommended starting settings after installation?

Start with stock suspension and steering link lengths, then add small toe and caster changes while testing to dial in the desired steering speed and centre feel.

Copyright © 2008-2026 rcjaz.com.au All rights reserved