DT-04 Alloy Shock Tower 7075-T6 DT402830F/R by GPM  [DT402830F/R]

7075-T6 Front and Rear Shock Mount

This CNC-cut 7075-T6 alloy shock tower is an aftermarket option for DT-04 chassis. It offers several mounting holes so you can change shock positions and tweak shock angle without modifying the shock bodies, helping when dialing in 1/10 DT-04 suspension geometry.

Fitment is simple: remove the OEM tower, move across any spacers or hardware you need, and bolt the replacement to the original mounting points using compatible hex screws. Confirm thread engagement, apply appropriate torque settings, and check that shock shafts have full clearance through travel.

Setup notes: changing tower hole selection changes leverage and the effective shock angle, which will affect rebound and compression. Make incremental trials, record results, and use the data to refine springs and damping choices.