EDS 181002 Chassis Droop Blocks 20mm for 1/8 and 1/10 Scale RC  [EDS-181002]

Workshop Tool: EDS 181002 Droop Blocks

The EDS 181002 Chassis Droop Gauge Blocks are a straightforward workshop aid for setting suspension droop on 1/8 and 1/10 models. Use the 20mm blocks to establish a consistent reference during setup sessions.

Droop basics for practical tuning

Droop measures how far the suspension extends with the car off the ground and affects traction and cornering balance. Accurate droop measurements let you match front and rear behaviour more easily.

Which models and how to position them

These blocks suit most common 1/8 and 1/10 buggies and touring cars. Position the blocks beneath the chassis at the recommended support points and then alter shock length or preload until the chassis rests correctly on the block.