Element Enduro Rear Shock Mount Upgrade JR-EE12-BK by Jazrider  [JR-EE12-BK]

Element Enduro Aluminum Rear Shock Damper Mount (Black)
Price:
AUD$16.45
Brand:
JAZRIDER
Model:
JR-EE12-BK
Condition:
Brand New
Write a review

Enduro rear shock damper upgrade

An RC-scale rear shock damper mount built for Element Enduro trail truck platforms, identified by part number JR-EE12-BK. The component swaps in for the stock plastic lower/upper attachment to provide a firmer aluminum mounting face.

By eliminating flex at the mounting point the mount helps preserve shock alignment and makes damper behavior more predictable. That stability is advantageous during tuning sessions, where consistent mounting helps you dial in rebound and compression with confidence.

Installation is simple: remove the stock plastic piece, line up the replacement mount with the factory holes, and secure with the original hardware or recommended fasteners. Take care to confirm screw length and thread engagement before final torque to avoid stressing nearby parts.

Note: this description refers to a scale RC accessory intended for model vehicles only and does not imply use on full-size vehicles.

How does the stiffer mount change tuning feedback?

A stiffer mount reduces unwanted movement at the shock pivot, so changes to damping and spring setup produce clearer, more repeatable results during test runs and setup checks.

Is installation reversible if I want to return to plastic?

Yes — the upgrade uses the same mounting holes as the original part, so you can reinstall the stock plastic component if needed, provided the original hardware is retained and undamaged.

Any tips for initial setup after installing?

After fitting, recheck static ride height and re-evaluate preload and damping in small increments to account for the change in mounting stiffness; this helps find the new baseline quickly.

Copyright © 2008-2026 rcjaz.com.au All rights reserved