Awesomatix A800MMX Graphite Upper Deck 2.0mm Upgrade by Factory Pro O-ACP001  [FP-O-ACP001]

Factory Pro FP-O-ACP001 Awesomatix A800MMX Upper Deck - Graphite 2.0mm
Price:
AUD$17.38
Brand:
Factory Pro
Model:
FP-O-ACP001
Condition:
Brand New
Write a review

Top plate replacement for Awesomatix A800MMX

The Factory Pro O-ACP001 upper deck is a 2.0mm graphite replacement made to fit the Awesomatix A800MMX chassis. It joins the shock towers to the centre of the car and is designed to change the chassis torsional characteristics for setup refinement.

Installation notes: this CNC-profiled plate matches A800MMX factory mounting points and keeps stock screw patterns and clearances. Fit the deck square to the chassis posts and tighten fasteners progressively and evenly to avoid uneven clamping forces. Do not over-tighten screws to reduce risk of stress on the graphite.

Tuning impact: fitting a stiffer upper deck tends to reduce unwanted flex, producing crisper steering and stronger mid-corner performance, but may reduce grip on very low-traction tracks. Use it as part of a coordinated setup approach with suspension and roll-centre adjustments.

Is this compatible with other A800 variants?

It is manufactured for the Awesomatix A800MMX; other A800 variants may have different mounting geometries, so verify dimensions before attempting to fit.

What hardware should I use for installation?

Use the factory recommended screws and lengths where possible, add thin washers if needed to distribute load, and tighten in small steps to ensure even seating of the plate.

Will this change require shock tuning?

Often yes; a stiffer deck can make the car feel harsher, so you may need to soften shock valving or springs to maintain balance and traction after fitting.

Copyright © 2008-2026 rcjaz.com.au All rights reserved