O-AP0001 40T 48pitch Spur Gear Upgrade for Tuning - Awesomatix A800MMX by Factory Pro O-AP0009  [FP-O-AP0009]

Price:
AUD$14.01
Brand:
Factory Pro
Model:
FP-O-AP0009
Condition:
Brand New
Write a review

Aftermarket 40T spur for O-AP0001

This 48pitch, 40-tooth spur gear is provided as an aftermarket upgrade for use on the O-AP0001 platform. It pairs with the motor pinion to set the drivetrain ratio and tooth engagement characteristics.

Fit this 40T spur when replacing the original large gear or when experimenting with different gear ratios during setup. Pay attention to axial placement and pinion mesh during install, ensure the spur turns true on its bearings, and make sure it does not foul the gearbox housing.

During final checks confirm pinion-to-spur engagement at low throttle, inspect bearings and backlash, and make sure rotation remains smooth across steering and suspension movement. Changing spur tooth count modifies final gearing, so match the 40T with a suitable pinion to tune acceleration versus top speed.

Can I use this spur gear as a direct replacement on O-AP0001?

Yes, this spur is intended as an aftermarket replacement for the O-AP0001 spur position and will fit where the original gear is mounted.

Any tips for smooth mesh setup?

Set axial location carefully, fine-tune pinion mesh at low throttle, and rotate the assembly to confirm there is no binding or gearbox interference before full-power runs.

Will the 40T improve acceleration?

Switching to a 40T changes the gear ratio; depending on the pinion chosen this can increase acceleration or top speed. Test combinations to find the ideal setup for your track or driving style.

Copyright © 2008-2026 rcjaz.com.au All rights reserved