Yokomo BD12 Competition Graphite Chassis Factory Pro O-YCP015  [FP-O-YCP015]

Price:
AUD$69.25
Brand:
Factory Pro
Model:
FP-O-YCP015
Condition:
Brand New
Write a review

Race-Ready Graphite Chassis for Yokomo BD12

Fit the Factory Pro O-YCP015 main chassis to sharpen the handling of your Yokomo BD12. Built from resilient graphite with a flat-matt surface, the 2.25mm thickness provides a firmer platform for consistent cornering.

Graphite Benefits for Race Use

Graphite delivers rigidity without a big weight penalty, so the Factory Pro O-YCP015 helps maintain higher corner speeds and improves feedback through the steering. That makes it a sensible upgrade for tuned setups.

Practical Installation Tips

Install the Factory Pro O-YCP015 by securing each mounting point evenly and using thread lock on metal screws. Inspect the chassis after hard sessions and replace it if structural damage appears.

Will this chassis require shock retune?

A stiffer chassis like the Factory Pro O-YCP015 can change roll behaviour, so you may need to soften shock settings or adjust sway bars to suit track conditions.

Is the finish durable under routine use?

The flat-matt finish resists minor scuffs and reduces reflection, but heavy impacts can still chip the graphite. Regular inspections help spot problems early.

Any advice for mounting electronics with this chassis?

Confirm servo and battery clearances before final assembly. Use thin foam or shims where needed to prevent contact between electronics and the flatter graphite surface.

Copyright © 2008-2025 rcjaz.com.au All rights reserved