FAZER Drift Bearing Upgrade 4x7x2.5 - Kyosho BRG404 2pcs  [KY-BRG404]

Kyosho BRG404 - Shield Bearing(4x7x2.5)2Pcs
Price:
AUD$18.06
Brand:
Kyosho
Model:
KY-BRG404
GTIN:
4548565493395
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 $15.17 each $5.78 or 16%
3+ $14.41 each $10.95 or 20%
Write a review

Performance bearings for on-road drift setups

The Kyosho BRG404 is a twin pack of shielded 4x7x2.5 bearings, supplied as 2 pcs for FAZER On-Road Drift models. They are designed to replace small rotating bearings where a compact, shielded solution is required.

Compatibility reminder: this item is catalogued for FAZER Drift series use and fits applications requiring the 4x7x2.5 form factor. Verify the bearing size specified by your chassis or hub before purchasing to confirm suitability.

Fitting advice: press the bearing evenly into the hub or carrier with non-marring tools, avoid pushing on the shield face, and check for correct axial alignment to reduce premature failure. Maintain a clean environment and inspect mating parts for damage prior to installation.

Tuning notes: installing fresh shielded bearings of the correct dimension can lower drivetrain friction and sharpen rotational response, aiding consistent control inputs for drift tuning. Regular bearing checks are a simple tuning upkeep practice.

Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
Yes, replacing worn bearings with correctly sized, shielded bearings can reduce friction and improve rotational smoothness when installed properly.
Use even pressure during installation, check for shaft wear, and run a brief break-in to assess changes in steering and throttle feel.

Copyright © 2008-2026 rcjaz.com.au All rights reserved